Inventflow as your partner for mechanical seals

Inventflow as your partner for mechanical seals

The most critical part of your pump

Damage to the mechanical seal is the most common cause of a pump being out of service. Malfunctions, leaks and reduced performance are often caused by a problem with the seal.

Shoud you replace seals immediately?

It is therefore very important that your mechanical seals function optimally. But why should you immediately replace the seal in the event of a defect? Our experience shows that in many cases mechanical seals can be overhauled, resulting in cost savings of up to 70%.

Our method

Inspection

Inspecting, recording and photographing the seals we have received.

Cleaning and Inspection Parts

Second inspection of all seal parts to determine whether there is normal wear or, for example, dry running or chemical effects on the seal parts.

Offer and execution

You will receive a non-binding offer based on the inspections carried out. By agreement, the seal faces are ground to ensure they are parallel and all O-ring faces are polished. The mechanical seal is then carefully mounted and tested if possible.

Delivery

Finally, the seal is packaged and we provide it with a sticker with our article number and your warehouse number.

Seal engineering in-house

For (high-end) applications where standard mechanical seals cannot be used, we provide you with tailor-made solutions.

Engineering of special seals based on your application is carried out entirely in-house.

Why partner with Inventflow for mechanical and special seals?

Reduce replacement costs


Have your seals overhauled by our specialists and reduce your replacement costs to 70%.

Brand and type independent


We supply and overhaul all your necessary seals, for both pumps and agitators.

Large stock


Does your seal need to be replaced? With a large stock, we are at your service quickly.

Fully in-house


Revision and engineering of seals is carried out entirely in-house.

Support


Do you have a calamity due to a defective seal? Contact us and you will be supported immediately.

The right seal for your application


Was damage caused by using an incorrect seal? We provide you with a suitable alternative!

Contact us

+31 (0)546 45 80 72

Available between 08:15 and 17:00

Available 24/7 for calamities

Address Twentepoort Oost 25, 7609RG Almelo

E-mail Info@inventflow.nl

en_USEN
Scroll to Top